Revitalize Any Tire Into A Rope Ottoman!

rope-ottoman-final

Now that winter’s over, it may be time to change a car’s tires. However, don’t simply recycle those away. Instead, revitalize one of those tires into a modern, stylish rope ottoman. In just a few simple steps from Handimania, anyone can build an eco-friendly ottoman and bring a home’s interior design to a whole new level. 

rope-ottoman-step01

Get together these supplies:

  • Tire (New or Old)
  • 6mm MDF cut into two 55cm diameter circles
  • Drill
  • Screwdriver
  • 6 screws
  • Twisted Cord
  • Glue Gun
  • Cloth
  • Scissors
  • Brush Sealer

Start by thoroughly cleaning the tire with a cloth. Then drill one MDF into the tire at three points on the edge of the circle, making sure to puncture through the rubber of the tire. Follow this up by tightly screwing in screws to all three holes. Repeat the previous steps on the other side of the tire.

rope-ottoman-step03

Now comes the rope! Take the hot glue gun and adhere some glue into the center of the circle. Press the tip of the rope to the center and begin snaking the rope around the center in a circular motion.

rope-ottoman-step05

Once the top is covered, continue roping around the edge of the tire, tightly fastening the rope to the edge. Then turn the tire over and follow this process through. Cut off the rope once the whole tire is coated completely.

rope-ottoman-step06

rope-ottoman-step08

Finally, seal off the ottoman with a brush and place it anywhere in a home.

rope-ottoman-step09

Caffeine Addict? Try Out This Clever Storage Display!

img_0667

Coffee mugs aren’t just for drinking homemade mochas. With all the cute and stylish designs coffee mugs have, why not free up some cupboard space and add some interest to the kitchen walls? Well with this easy pallet coffee cup holder project from One Little Bird, you can!

Start by gathering these materials:

  • Pallet
  • Hooks
  • Screws
  • Sandpaper
  • Right Angle Ruler
  • Tape measure
  • Pencil
  • Circular Saw
  • Cordless Drill
  • Screwdriver

img_0584

Begin by using the circular saw to cut the pallet to a manageable size. Then sand down this mini pallet, making sure the wood is smooth.

img_0590

 

Once sanded, decide if decoration for the project is essential. In One Little Bird’s design, they decided to sponge brush the word “coffee” with stencils to add style.

img_0646

 

Next it’s time for the hooks! Take a ruler and pencil to measure where the hooks will go. Follow this step by drilling the hooks into the chosen spots. While the spaces should be event spaced, don’t stress if the placement isn’t perfect. The mugs will distract from any unevenness.

img_0662

Finally, hang the most stylish mugs possible and enjoy this storage display!