Revitalize Any Tire Into A Rope Ottoman!

rope-ottoman-final

Now that winter’s over, it may be time to change a car’s tires. However, don’t simply recycle those away. Instead, revitalize one of those tires into a modern, stylish rope ottoman. In just a few simple steps from Handimania, anyone can build an eco-friendly ottoman and bring a home’s interior design to a whole new level. 

rope-ottoman-step01

Get together these supplies:

  • Tire (New or Old)
  • 6mm MDF cut into two 55cm diameter circles
  • Drill
  • Screwdriver
  • 6 screws
  • Twisted Cord
  • Glue Gun
  • Cloth
  • Scissors
  • Brush Sealer

Start by thoroughly cleaning the tire with a cloth. Then drill one MDF into the tire at three points on the edge of the circle, making sure to puncture through the rubber of the tire. Follow this up by tightly screwing in screws to all three holes. Repeat the previous steps on the other side of the tire.

rope-ottoman-step03

Now comes the rope! Take the hot glue gun and adhere some glue into the center of the circle. Press the tip of the rope to the center and begin snaking the rope around the center in a circular motion.

rope-ottoman-step05

Once the top is covered, continue roping around the edge of the tire, tightly fastening the rope to the edge. Then turn the tire over and follow this process through. Cut off the rope once the whole tire is coated completely.

rope-ottoman-step06

rope-ottoman-step08

Finally, seal off the ottoman with a brush and place it anywhere in a home.

rope-ottoman-step09