Attention Music Lovers: A Home Improvement Project

Screen Shot 2015-01-02 at 12.41.11 PM

chillm wanted to spice up this bland space with some music

Music enthusiasts get a bad rap concerning home improvement. They love going to festivals or spinning their favorite records, but are not concerned with fixing up their bedrooms. This, of course, couldn’t be further from the truth and this vinyl album wall by chillm proves it. With this project, music and DIY work in harmony to create an awesome feature wall.

Screen Shot 2015-01-02 at 12.40.05 PM

Project supplies by chillm

First, get together supplies:

  • Five 8-foot aluminum slides
  • A laser level
  • An anchor kit of screws and bits
  • An electric drill
  • A selection of vinyl albums

After pulling these together, get to work on the first row. This should be approximately 18 inches above the ground, depending on the height of the walls in the room. Drill the first 8-foot aluminum slide into the wall with a drill on both ends. Make sure the slide is level before moving on to the next row.

Screen Shot 2015-01-02 at 12.40.22 PM

First row by chillm

When adding the next row, leave a space of at least 12 inches from the first row. In order to make sure there is enough room for the records to be displayed, slide the records into place on the first row. Measure this space several times before installing the second row, leaving little space between the records and slides for that seamless look. After several measurements, drill in the aluminum slides on both ends just like the first row.

 

The next 3 rows will require much less time measuring, but the same time installing. Place the vinyl albums in on each row, just to make sure the desired look is achieved. A step ladder may be needed for the last 2 rows.

With the last record in place, this statement wall displays both a music collection and great craftsmanship.

Screen Shot 2015-01-02 at 12.41.27 PM

Final feature wall by chillm

For other home improvement projects, keep checking back with Idea Corner!