The Best Way To Reuse Old Picture Frames

DIY-Frame-Shelves-500x750
Everyone knows the struggle: too many picture frames, not enough photos. After all, why print out those memories when there’s the instant gratification of Facebook and Instagram likes and comments? Well, struggle no more! Get ready to put those picture frames to use with these frame shelves.

Start by removing the glass, backing and hardware from all the frames intended for this project. Next, gather some 1×4 boards and cut them to size to make the sides of the the shelving box.

Glue-for-frame-500x750

Building-a-frame-shelf-500x670

To form the box, add lines of Gorilla glue to each side and nail each side together. Then apply wood glue to the back of the frame and lay it on top of the box. Nail 1 1/4″ nails through the frame and into the box to secure the shelf together.

Box-for-Frame-Shelf-500x750

Nail-Frame-to-Box-500x750

Frame-Shelf-How-To-500x750

Before painting the shelf to match the frame, fill any holes with wood filler. Use spray paint to apply the shelving’s coat of paint.

When dry, adhere at least 3 command strips to the back of each shelve.

Command-Strips-500x750

Lastly, hang them on the desired wall. Enjoy these stylish and eco-friendly shelves in any home today!

For a more comprehensive overview of the frame shelve project, check out Shanty 2 Chic.

Create The Best Canopy Bed On Any Budget!

54eafb1ae0f2a_-_canopy-bed-0709-de

Chicago Handyman has shown step-by-step guides for headboards and other bedroom improvements, and now it’s time for another bedroom improvement project: a fashionable, affordable canopy bed.

The supplies for this project should cost no more than $10:

  • 10-inch embroidery hoop
  • 44-inch rod-pocket curtain panels
  • 24-inch half-inch wide ribbon
  • Pot rack hook

41Gi4v9FpyL._SY300_

For starters, unscrew the embroidery hoop and discard the inner ring. Follow this by sliding the curtain panels onto the hoop and screwing the embroidery hoop back together.

contemporary-curtains

Now take the ribbon and tie it in a double-knot at each side where there are gaps between the curtain panels. Then tie the loose ends together in a bow.

 

Finally comes the hard part, screw the pot rack into the ceiling. Make sure that the pot-rack in secure and slip the center of the bow over the hook to hang it.

Unknown

 

When all the steps are completed, any bedroom will look much more glamorous and be turned into the ultimate oasis.

For a complete overview and other canopy bed ideas, check out DIY roundup.

 

The Best Computer Mouse On The Market: Genius Mouse

With all the tablets, laptops and half-tablet/half-laptops out there, many people forget that desktops are still a necessary technology. And these desktops require a good computer mouse. So for all the environmental nuts out there, check out the Genius Mouse!

This wireless mouse has no battery and a built-in gold capacitor that makes it reusable for 100,000 charges. And the best part? It only takes 3 minutes to charge.

So for $34.49, get the Genius Mouse to add even more green to your technology.

mouse

Create A Floating Headboard with Old Flooring

Floating Headboard

diy-headboard-with-led-lighting_2

Reduce, Reuse, Recycle does not have to be boring. It can even be stylish. Following these simple steps from Remove & Replace, anyone can make an awesome, innovative floating headboard. All that’s needed are supplies from a previous project and a couple hours of work:

To begin, get these materials:

  •  Leftover walnut flooring
  • 1/2″ MDF backing
  • Oak wood trim
  • 24″ stud mounted French cleats
  • 15′ of string LED lighting
  • Wiring to a dimmer switch

Start by mounting the slab of walnut flooring to the MDF backing. Then nail stud mounted cleats in the center of the area where the headboard will go. Follow this with nailing the oak wood trim to the border of where the slab will go.

diy-headboard-with-led-lighting_4

Using attach brackets, add the LED lighting to the trim. Once the LED lighting is plugged in and the wiring is attached for the dimmer. Finally, mount the walnut flooring on MDF backing on the trim.

diy-headboard-with-led-lighting_5

When this is completed, this floating headboard will not only make the room look more modern, but add another light source to a bedroom.

diy-headboard-with-led-lighting_1